Fatal error: Network error with FD during Backup
Related Errors: ERR=Connection reset by peer Fatal error: No Job status returned from FD. Problem: It is likely the server was restarted and/or the ClusterLogics service interrupted Solution: Check firewall, restart service (Linux: service baroes-fd ...
Error: Failed to connect to Storage daemon: yourSD IP:9103
Problem: The FD cannot connect to the SD IP/port Common Solution: Please make sure you can telnet to the IP and port from the FD to the SD along with telnet from SD to FD port 9102(check any routes and firewall configs). If LAN IPs are in use, make ...
Firewalling with ClusterLogics
ClusterLogics uses three primary tcp ports to function 9101 (dir), 9102 (FD), and 9103(SD). For a ClusterLogics deployment, tcp 9102 on the servers you are backing up (FDs) must be open to our directors that will connect from source ip: ...
How to get started with ClusterLogics
Once you have signed up for an account and want to start backing up a server or virtual machines, please follow the steps below Dedicated Storage Daemon (dedicated storage device/server) 1) add a storage device (dashboard > install storage) - install ...
ClusterLogics Interface showing "No DATA" for Storage Devices
Fix: SSH Key must be installed Without the SSH key installed, our system cannot log in and check the storage usage if you do not wish to install the ssh key on your SD, that is fine, but, we are not able to generate usage graphs without it installed ...